Ulano #5 Stencil Remover Paste Quart

Ulano #5 Stencil Remover Paste. One Quart.

Freeze Warning. If this product freezes, it will thaw out as a liquid. It will still work in liquid form.

STENCIL REMOVER PASTE No. 5 is a ready-to-use paste stencil remover for fast and thorough removal of direct emulsions, capillary films, direct/indirect system films, and no-developer indirect system films (such as Ulanolux UP3 and Pulsar) from all types of mesh, including metalized polyester.  Its thick consistency affords somewhat easier handling than liquids for the removal of larger-sized stencils.  Stencil Remover Paste No. 5 will not etch mesh. It contains no strong alkalis or hypochlorites, and will not attack adhesives on stretch-and-glue frames.  Odor free.

Instructions
1. Remove ink with the proper solvent.
2. Degrease first with Screen Degreaser Liquid  No. 3 to remove solvent residues and to help speed the action of the stencil remover. Rinse thoroughly.
3. Use a soft brush to apply Stencil Remover Paste No. 5 on the mesh from both sides.
4. Wait five minutes - no longer. Do not allow the stencil remover to dry on the screen, as this can result in a permanent stencil.
5. Wash away the stencil with a hard spray of water, preferably a power spray.
6. Note: Avoid freezing Stencil Remover Paste No. 5. Freezing and thawing will change the consistency from a paste to a liquid. This has no effect on the chemical activity as a stencil remover - it can be used in the same way as Stencil Remover Liquid No. 4.

Health & Safety Information

Stencil Remover Paste No. 5 is a strong oxidant. It can cause skin irritation; use gloves. Keep the container closed tightly. Clean spills immediately.

First Aid: In case of contact with the eyes or skin, flush immediately with water. If irritation develops, contact a physician.