Browse Categories
Search

Aerosols/Spray Adhesives

Aerosol Products and Spray Adhesives

Spray adhesives are the most widely used for securing t-shirts and other garments to your platens. They are fast, easy to use, and tack-up (get sticky) very fast. Flash-Mist spray is a mist spray that can withstand the intense heat of a flash unit for long durations while retaining adhesive tack for printing. If you need to re-apply, simply stop the press for a moment, spray across your platen and continue printing. Web-spray adhesive is used for heavier garments such as sweatshirts or other heavy/thick fabrics. Web spray is a thicker "web" like adhesive that has more density than flash mist, which provides a stronger tack to hold down those heavier garments.

Waterbased pallet adehsive is a non-aerosol solution to mist-flash and web sprays that will also stand up to flashing during print runs. It is best to apply the pallet adhesive over pallet protect tape to keep your platens as clean as possible. At the end of a print run or production day, you can simply remove the protect tape and your platen is good as new and ready for the next days printing. If you need to re-apply during a print run, simply put some waterbased pallet adhesive on the platen, and use a plastic scraper to evenly spread the glue across the platen.

Screen Opener is an aerosol spray that is designed to open up clogged areas of your screen while on press during production. If you notice an area of your print that is no longer printing well, simply spray it with screen opener, carefully wipe the residue away, and do a few squeegee pulls on a test shirt to push through the stuck ink. A fast and effective way to get back on-press without having to tear down a screen and clean it thoroughly.

Toner Aide is an aerosol spray designed to increase the density in laser vellum paper positives. Many laser printers are unable to print sufficient dense black positives which usually requires the user to print 2 or 3 positives and layer them up to acheive dense prints. Toner Aide when sprayed over a laser vellum paper positive, increases density to help eliminate the need to print multiple positives for layering. Spray in even back and forth motions from about 12" away from the positive. Be careful not to spray too much, as it may cause the toner to bleed.
32oz Spray Bottle
CSS E-Store: $4.59
32oz Spray Bottle
Spray Bottle
Albachem Clear Screen Screen Opener 14oz Can
CSS E-Store: $7.98
Albachem Clear Screen Screen Opener 14oz Can
Clear Screen Screen Opener Can
Albachem Premium Flash Adhesive 13oz Can
CSS E-Store: $7.98
Albachem Premium Flash Adhesive 13oz Can
Flash Adhesive Can 13oz
screen printing web spray adhesive
Albachem Premium Web Spray Adhesive 13oz Can
CSS E-Store: $7.98
Albachem Premium Web Spray Adhesive 13oz Can
Web Spray Adhesive Can
Albatross Brush Tac Gallon
CSS E-Store: $67.50
Albatross Brush Tac Gallon
Albatross Palette Adhesive Gallon
Albatross Brush Tac Pint
CSS E-Store: $18.92
Albatross Brush Tac Pint
Albatross Textile Palette Adhesive
Franmar Adhesive Remover Quart
CSS E-Store: $18.95
Franmar Adhesive Remover Quart
Franmar Adhesive Remover formerly Ickee Stickee Unstuck
Plastic Blockout Squeegee
CSS E-Store: $3.29
Plastic Blockout Squeegee
Blockout / Adhesive Squeegee
Shopping Cart
Your cart is empty.