Browse Categories
Search

Scoop Coaters

Scoop Coaters are measured by OVERALL Length. Please keep this in mind when ordering.

For determining the best size scoop coater for your needs, consider all sizes of frames you will use. For a standard 20" x 24" frame, a 15" or 16" scoop will provide maximum coating area. It is always best to leave a .5" - 1" gap on either sides of your scoop coater so that you can coat without bumping the frame and causing uneven areas in your emulsion. To cover up the open areas where no emulsion was coated, use either a Screen Filler or Screen Blockout, or Blockout Tape.

Coating methods: All screen printers have their own peference to coat screens. While a thinner coat of emulsion may allow you to get more screens coated per bucket, you run the risk of premature screen failure or poor resolution and exposure due to minimal stencil thickness. Ulano and Autotype provide Technical Data sheets (available on our pages for each emulsion) which outline expsoure guidelines based on varying methods of coating screens. Our recommendation is to coat 2 times per squeegee and print side, coating wet on wet, but ultimately each printer will determine the most suitable coating methods for their needs.
16" Scoop Coater
CSS E-Store: $24.50
16" Scoop Coater
Scoop Coater
18" Scoop Coater
CSS E-Store: $26.50
18" Scoop Coater
Scoop Coater
20" Scoop Coater
CSS E-Store: $28.50
20" Scoop Coater
Scoop Coater
Shopping Cart
Your cart is empty.